View NE5511279A-T1A-A_1288288.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEC'S 7.5 V UHF BAND NE5511279A RF POWER SILICON LD-MOS FET
FEATURES
* HIGH OUTPUT POWER: Pout = 40.0 dBm TYP., f = 900 MHz, VDS = 7.5 V, Pout = 40.5 dBm TYP., f = 460 MHz, VDS = 7.5 V, * HIGH POWER ADDED EFFICIENCY: add = 48% TYP., f = 900 MHz, VDS = 7.5 V,
5.7 MAX. 0.60.15
OUTLINE DIMENSIONS (Units in mm)
PACKAGE OUTLINE 79A
(Bottom View)
4.2 MAX.
1.50.2
Source
Source
21001
4.4 MAX.
* HIGH LINEAR GAIN: GL = 15.0 dB TYP., f = 900 MHz, VDS = 7.5 V, GL = 18.5 dB TYP., f = 460 MHz, VDS = 7.5 V, * SURFACE MOUNT PACKAGE: 5.7 x 5.7 x 1.1 mm MAX
W
0.40.15 5.7 MAX.
0.80.15
1.0 MAX.
0.8 MAX.
3.60.2
APPLICATIONS
* UHF RADIO SYSTEMS * CELLULAR REPEATERS * TWO-WAY RADIOS * FRS/GMRS * FIXED WIRELESS
DESCRIPTION
NEC's NE5511279A is an N-Channel silicon power laterally diffused MOSFET specially designed as the transmission power amplifier for 7.5 V radio systems. Die are manufactured using NEC's NEWMOS1 technology and housed in a surface mount package. This device can deliver 40.0 dBm output power with 48% power added efficiency at 900 MHz using a 7.5 V supply voltage.
(TA = 25C) MIN 38.5 - 42 - - - - - - - 1.0 - - 20 TYP 40.0 2.5 48 15.0 40.5 2.75 50 18.5 - - 1.5 5 2.3 24 MAX - - - - - - - - 100 100 2.0 - - - UNIT dBm A % dB dBm A % dB nA nA V C/W S V TEST CONDITIONS f = 900 MHz, VDS = 7.5 V, Pin = 27 dBm, IDSQ = 400 mA (RF OFF) Pin = 5 dBm f = 460 MHz, VDS = 7.5 V, Pin = 25 dBm, IDSQ = 400 mA (RF OFF) Pin = 5 dBm VGS = 6.0 V VDS = 8.5 V VDS = 4.8 V, IDS = 1.5 mA Channel to Case VDS = 3.5 V, IDS = 900 mA IDSS = 15 A
ELECTRICAL CHARACTERISTICS
SYMBOL Pout ID add GL Pout ID add GL IGSS IDSS Vth Rth gm BVDSS PARAMETER Output Power Drain Current Power Added Efficiency Linear Gain Output Power Drain Current Power Added Efficiency Linear Gain Gate to Source Leak Current Drain to Source Leakage Current (Zero Gate Voltage Drain Current) Gate Threshold Voltage Thermal Resistance Transconductance Drain to Source Breakdown Voltage
Notes: DC performance is 100% tested. RF performance is tested on several samples per wafer. Wafer rejection criteria for standard devices is 1 reject for several samples.
0.90.2
California Eastern Laboratories
0.20.1
* SINGLE SUPPLY: VDS = 2.8 to 8.0 V
1.2 MAX.
add = 50% TYP., f = 460 MHz, VDS = 7.5 V,
3
Gate
Drain
Gate
Drain
NE5511279A ABSOLUTE MAXIMUM RATINGS1 (TA = 25 C)
SYMBOLS VDS VGS ID PTOT TCH TSTG PARAMETERS UNITS V V A W C C RATINGS 20.0 6.0 3.0 20 125 -55 to +125 Drain Supply Voltage Gate Supply Voltage Drain Current Total Power Dissipation Channel Temperature Storage Temperature
2
RECOMMENDED OPERATING LIMITS
SYMBOLS VDS VGS IDS PIN PARAMETERS UNITS V V A dBm TYP 7.5 2.0 2.5 27 Drain to Source Voltage Gate Supply Voltage Drain Current1 Input Power f = 900 MHz, VDS = 7.5 V
MAX 8.0 3.0 3.0 30
Note: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. VDS must be used under 12 V on RF operation.
P.C.B. LAYOUT (Units in mm)
79A PACKAGE
4.0 1.7 Source
ORDERING INFORMATION
PART NUMBER NE5511279A-T1-A QTY * 12 mm wide embossed taping. * Gate pin faces the perforation side of the tape. * 1 Kpcs/Reel
NE5511279A-T1A-A
Gate 5.9 1.0 Drain 1.2 0.5 Through hole 0.2 x 33 0.5 6.1 0.5
Note: Use rosin or other material to prevent solder from penetrating through-holes.
TYPICAL PERFORMANCE CURVES
OUTPUT POWER, DRAIN CURRENT, d, add vs. INPUT POWER
45
(TA = 25C) OUTPUT POWER, DRAIN CURRENT, d, add vs. INPUT POWER
Drain Efficiency, d (%) Power Added Efficiency, add (%)
f = 900 MHz
5 Pout 4 IDS
45
Output Power, Pout (dBm)
Output Power, Pout (dBm)
40
100
40 IDS 35 d
4
100
35
d
3
75
3
75
30
add
2
50
30
add
2
50
25
1
25
25
1
25
20 10 15 20 25 30
0 35
0
20 10 15 20 25 30
0 35
0
Input Power,Pin (dBm)
Input Power,Pin (dBm)
Drain Efficiency, d (%) Power Added Efficiency, add (%)
f = 460 MHz
5
Drain to Source Current, IDS (A)
Drain to Source Current, IDS (A)
Pout
NE5511279A RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow
Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per pin of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below
Condition Symbol IR260
VPS
VP215
Wave Soldering
WS260
Partial Heating
HS350-P3
Caution Do not use different soldering methods together (except for partial heating).
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
08/26/2003
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of NE5511279A-T1A-A

	To Download NE5511279A-T1A-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .